Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: resistanceDescription: VISHAY LPS0300H47R0JB Power resistor, 300W, 47R, 5%41561+$265.538510+$258.611450+$253.3006100+$251.4534200+$250.0679500+$248.22071000+$247.06622000+$245.9117 -
![]()
Category: resistanceDescription: LPS300 LPS300 series 300 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS300 power resistors is 300 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 300 W | ---------- | Resistance tolerance | 5% | Temperature coefficient | 1U | 300ppm/° C | 10U | 150ppm/° C Operating temperature | -50 → 120 ° C | Thermal resistance | 0.112 ° C/W | Extreme component voltage | 5 kV | Insulation resistance | ≥ 104 | Inductance | ≤ 0.1 μ H | Size | 60 x 57 x 25.2 mm | # # # Non inductive - Panel mounted # # # Non inductive - Heat sink can be mounted with almost no inductance, thick film power resistor, designed for direct connection to heat sink, suitable for installation in positions that require easy connection in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of10651+$215.106410+$209.494950+$205.1928100+$203.6964200+$202.5741500+$201.07771000+$200.14242000+$199.2072 -
![]()
Category: resistanceDescription: 1100 W LPS1100 Vishay LPS 1100 series power resistors, designed for installation in heat sinks. Featuring thick film technology, the LPS 1100 series is non inductive, easy to install, and has a low radiation casing. Suitable for applications such as industrial, transportation, medical, and HEV/EV. High power: up to 1100 W, small size at 25 ° C, thin: 57 mm x 60 mm Non inductive:<0.1 μ H High dielectric strength: up to 12 kVRMS Lightweight: 79 g size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm51801+$1563.890910+$1549.673725+$1542.565150+$1535.4565100+$1528.3479150+$1521.2393250+$1514.1307500+$1507.0221 -
![]()
Category: resistanceDescription: 1100 W LPS1100 Vishay LPS 1100 series power resistors, designed for installation in heat sinks. Featuring thick film technology, the LPS 1100 series is non inductive, easy to install, and has a low radiation casing. Suitable for applications such as industrial, transportation, medical, and HEV/EV. High power: up to 1100 W, small size at 25 ° C, thin: 57 mm x 60 mm Non inductive: high dielectric strength: up to 12 kVRMS Lightweight: 79 g # # # Non inductive - panel installation # # Non inductive - heat sink can be mounted with almost no inductance, thick film power resistor, designed for direct connection of heat sink, suitable for installation in locations where simple connection is needed in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mount90071+$1107.471210+$1068.612650+$1063.7553100+$1058.8979150+$1051.1262250+$1044.3260500+$1037.52571000+$1029.7540 -
![]()
Category: resistanceDescription: LPS800 LPS800 series 800 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS800 power resistors is 800 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 800 W | ---------- | Resistance tolerance | 5% | Temperature coefficient | 1U | 300ppm/° C | 10U | 150ppm/° C Operating temperature | -50 → 120 ° C | Thermal resistance | 0.112 ° C/W | Extreme component voltage | 5 kV | Insulation resistance | ≥ 104 | Inductance | ≤ 0.1 μ H | Size | 60 x 57 x 25.2 mm | # # # Non inductive - Panel mounted # # # Non inductive - Heat sink can be mounted with almost no inductance, thick film power resistor, designed for direct connection to heat sink, suitable for installation in positions that require easy connection in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of80921+$569.016610+$554.172650+$542.7923100+$538.8339200+$535.8652500+$531.90681000+$529.43282000+$526.9588 -
![]()
Category: resistanceDescription: VISHAY LPS0300H4700JB Power resistor, 300W, 470R, 5%17651+$265.538510+$258.611450+$253.3006100+$251.4534200+$250.0679500+$248.22071000+$247.06622000+$245.9117 -
![]()
Category: resistanceDescription: LPS800 LPS800 series 800 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS800 power resistors is 800 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 800 W | ----------- | Resistance tolerance | 5% | Temperature coefficient | 1U50361+$832.493010+$803.282750+$799.6314100+$795.9801150+$790.1381250+$785.0263500+$779.91451000+$774.0724 -
![]()
Category: resistanceDescription: LPS800 LPS800 series 800 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS800 power resistors is 800 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 800 W | ----------- | Resistance tolerance | 5% | Temperature coefficient | 1U80991+$950.904810+$917.539750+$913.3691100+$909.1984150+$902.5254250+$896.6865500+$890.84761000+$884.1746 -
![]()
Category: resistanceDescription: VISHAY LPS0800H1R50KB LPS 800 H 1U5 10% BO15 e 47T7555 new38201+$2373.918810+$2352.337725+$2341.547250+$2330.7566100+$2319.9661150+$2309.1756250+$2298.3850500+$2287.5945 -
![]()
Category: resistanceDescription: VISHAY LPS0800H1000JB Power resistor, 800W, 100R, 5%69391+$605.698010+$584.445450+$581.7888100+$579.1323150+$574.8817250+$571.1626500+$567.44341000+$563.1928 -
![]()
Category: resistanceDescription: Res Thick Film 1.5Ω 10% 800W ±300ppm/℃ Molded Screw Terminal Bolt-On Box3293 -
![]()
Category: resistanceDescription: Res Thick Film 100KΩ 10% 600W ±150ppm/℃ Molded Screw Terminal Flange Mount Box9303 -
![]()
Category: resistanceDescription: LPS600 LPS600 series 600 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS600 power resistors is 600 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 600 W | ---------- | Resistance tolerance | 5% | Temperature coefficient | 1U | 300ppm/° C | 10U | 150ppm/° C Operating temperature | -50 → 120 ° C | Thermal resistance | 0.112 ° C/W | Extreme component voltage | 5 kV | Insulation resistance | ≥ 104 | Inductance | ≤ 0.1 μ H | Size | 60 x 57 x 25.2 mm | # # # Non inductive - Panel mounted # # # Non inductive - Heat sink can be mounted with almost no inductance, thick film power resistor, designed for direct connection to heat sink, suitable for installation in positions that require easy connection in limited space. Specially formulated metal ceramic film is attached to high-purity alumina, with a hard epoxy molded shell and integrated terminals inside. Values less than or equal to 1 Ω have 4 wiring terminals, allowing voltage induction; All other values have 2 wiring terminals for applications including circuits with main parameters of low inductance, high frequency, and pulse overload. **Application Description: * * Linear decrease from full power to zero power at 125 ° C for 25 and 50W types at 25 ° C and 100 and 250W types at 70 ° C. To achieve optimal thermal conductivity, it is recommended to use thermal paste between the aluminum oxide bottom surface and the radiator frame/surface. Main feature - Overload duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of18031+$375.182910+$365.395550+$357.8919100+$355.2819200+$353.3244500+$350.71451000+$349.08322000+$347.4520 -
![]()
Category: resistanceDescription: LPS600 LPS600 series 600 W thick film power resistor, designed for installation on heat sinks. The rated value of these LPS600 power resistors is 600 W at a bottom shell temperature of 85 ° C. The shell has low thermal radiation and a wide resistance range of 0.3 to 900 k Ω. Power at 85 ° C | 600 W | ----------- | Resistance tolerance | 5% | Temperature coefficient | 1U33111+$570.330610+$550.319050+$547.8176100+$545.3161150+$541.3138250+$537.8118500+$534.30971000+$530.3074 -
![]()
Category: resistanceDescription: VISHAY LPS0300H1000JB Power resistor, 300W, 100R, 5%25001+$265.855910+$258.920550+$253.6034100+$251.7539200+$250.3669500+$248.51741000+$247.36152000+$246.2056 -
![]()
Category: resistanceDescription: Res Thick Film 25KΩ 10% 8W ±100ppm/℃ Conformal AXL Thru-Hole Blister T/R6574 -
![]()
Category: resistanceDescription: Res Wirewound 10Ω 5% 25W 50ppm/℃ Aluminum Housed AXL Flange Mount Loose/Tray42215+$20.597950+$19.7176200+$19.2247500+$19.10141000+$18.97822500+$18.83745000+$18.74937500+$18.6613 -
![]()
Category: resistanceDescription: Res Thin Film 5.11KΩ 0.1% 0.25W(1/4W) ±15ppm/℃ Epoxy AXL Ammo23225+$1.381125+$1.278850+$1.2071100+$1.1765500+$1.15602500+$1.13045000+$1.120210000+$1.1048 -
![]()
Category: resistanceDescription: TE CONNECTIVITY / CGS 5-1625984-6 Resistor, 3.3Ω, 50W, 1.25kV, ± 5%, HSA50 Series, Wirewound16085+$20.895050+$20.0021200+$19.5020500+$19.37701000+$19.25202500+$19.10915000+$19.01987500+$18.9305 -
![]()
Category: resistanceDescription: Metal oxide film resistance 1k Ω± 5% 1W208720+$0.126950+$0.1175100+$0.1128300+$0.1090500+$0.10621000+$0.10435000+$0.102510000+$0.1006 -
![]()
Category: resistanceDescription: Res Wirewound 820Ω 5% 1200W ±440ppm/℃ Aluminum Housed RDL Lug Bolt-On Loose77711+$1122.678710+$1112.472525+$1107.369450+$1102.2664100+$1097.1633150+$1092.0602250+$1086.9571500+$1081.8540 -
![]()
Category: resistanceDescription: Res Thin Film 20KΩ 0.1% 0.25W(1/4W)33625+$2.262625+$2.095050+$1.9777100+$1.9274500+$1.89392500+$1.85205000+$1.835210000+$1.8101 -
![]()
Category: resistanceDescription: Resistors, 510 ohm, HS Series, 150 W, ± 5%, solder pads, 2.5 kV86431+$65.095810+$62.2655100+$61.7561250+$61.3598500+$60.73721000+$60.45412500+$60.05795000+$59.7183 -
![]()
Category: resistanceDescription: Winding resistance 3.3k Ω± 5% 4W519110+$1.215050+$1.1520100+$1.1070300+$1.0800500+$1.05301000+$1.02602500+$0.98555000+$0.9765 -
![]()
Category: resistanceDescription: RES CHAS MNT 1.5Ω 5% 100W93331+$50.633710+$47.7285100+$45.5703250+$45.2383500+$44.90621000+$44.53272500+$44.20075000+$43.9932
